GIM2D/GBADPIX

Parameters

    seg_image = "cl24w2t_red_m" Name of segmentation image
    bad_image = "cl24w2dqft"    Name of bad pixel image
      badflag = -2.             Bad pixel flag value
        (mode = "q")

GBADPIX is used to apply the combined DQF image from DQFCOMB to the SExtractor segmentation image. The value of the parameter badflag should be kept to -2. This is the value recognized by GIMFIT2D as a flag for bad pixels which should not be included in the bulge/disk decompositions.

Last Update: 10 July 1997
Comments/questions to Luc.Simard(at)nrc-cnrc.gc.ca